Shenzhen Changya Technology Co., Ltd. Automatic Roll Punching Machine is a special for roll products, automatic feeding, feeding, cutting, receiving integrated automatic punching equipment, this product adopts industrial computer control, CCD image positioning of a high-tech automation equipment. In 2012, our company successfully developed a CYC5021 super full-automatic roll-to-roll automatic positioning punching machine, which truly realized the operation of unmanned feeding and met the requirements of customers for mass production.
1. features:
1. Automatic light-sensitive feeding: As long as the processed material is outside the infrared sensing range, the feeding machine will automatically discharge the material to provide the material length required for the next feeding.
2. Automatic roller guide frame: the product passes through and is fixed with the surrounding guide block to ensure that the product always maintains the same direction. 3. Dust removal and anti-static function: dust removal and anti-static rollers are installed on the work surface, which can remove dust and static electricity on the surface of the product.
4. Fast direction positioning: The work surface is equipped with a direction positioning function to ensure that the product does not deviate from the material during the long-distance drawing process.
5.CCD image precise positioning: CCD industrial camera precise positioning, to ensure accurate positioning of products, will never appear partial hole leakage phenomenon.
6. Punching die: the punching die adopts imported high-speed steel and fine grinding and vacuum heat treatment to ensure the accuracy and service life of the die.
7. Man-machine interface display: punching machine using man-machine interface display, can be synchronized to watch the punching live.
8.N C servo feeding: NC servo feeding machine adopts imported Japanese Yaskawa servo feeding machine, PLC programming, can set 30 steps, each feeding accuracy to ensure 0.01MM.
9. Light-sensitive color tracking locator: Light-sensitive color tracking can control the synchronous punching of four punching heads to ensure consistency.
10. Automatic cutting function: After the product positioning hole is processed OK, the cutting knife can automatically cut through the PLC signal.
11. Discharge speed: can be adjusted at will, the starting frequency from 0 to slowly rise to run, to avoid starting too fast, causing material surface scratches.
12. Punching speed: This equipment uses CY series software independently developed by our company, high-speed stable motor, high-computing industrial computer, and the punching speed can reach 1 second/4 holes
2. function: an employee puts the material in place, the full-automatic punching machine starts, the whole roll is fully automatic feeding, full-automatic receiving and full-automatic cutting. The CYC5021 machine is equipped with four punching heads. It can be positioned and punched at the same time, and one employee can operate 4 to 5 full-automatic punching machines at the same time, which can greatly increase the production capacity, and can offset the output of 10 semi-automatic punching machines on the market, thus greatly reducing the cost.
3. application fields: positioning hole processing in electronics, signage, packaging, printing and other industries, such as FPC soft board, film, diazo sheet, mobile phone panel, adhesive sticker, membrane switch, film, PE PC, PVC, PET film, polyester film
4. parameters:
Shipping method: NC visiting clothes shipping
Working voltage: AC220V maximum processing width: 500mm
Dimensions: 2700*900*900 (excluding feeder)
Use of the environment: air conditioning
Maximum range of movement of the machine head: x = 100MM y = 185MM
Maximum moving range of external head: x = 450MM y = 90MM punching speed: 0.35S/4 holes
5. after-sales service:
One year warranty, lifetime maintenance.
